1 888 452-6382
Recherche Menu
Ameta SolutionProductsChemicals MetafluxCorrosion Protection70-3550 Rust-I-Sol
Categories x
Buy in store

70-3550 Rust-I-Sol

Waterproof and airproof layer

MADE IN GERMANY

70-3550 Rost-I-Sol Metaflux 70-3550 Rost-I-Sol Metaflux 

• Lead-free, non-caustic patented brush-on rust neutralizer
• Can be safely cleaned after drying
• Works well on moistened rust
• Can be welded over at any time
• Does neither attack nor damage any painted or zinc surfaces
• 500-hour salt spray test according to DIN 50021 certified (University of Paderborn–Prof.Dr.Goldschmidt).
• Forms a black water and airproof layer on rust to insulate and protect from weathering agents causing oxidation
• Color: yellow turning black
• pH value: 7.0
• Storage temperature: 5°C to 40°C [42° to 104°F] protect from frost
• Application temperature: 3°C to 40°C [37° to 104°F]
• optimal range: 15°C – 28°C [59°F – 82.4°F]
• Temperature resistance: 125/175°C [257/347°F]
• 90 μm layer consumption rate: 1 kg = 4-5 m² [2.20 lbs. = 43-54 ft².]

Available in aerosol:

SKU: ca4c498f3abb Categories: , Tag:
WHAT IS IT?
Technical chart Certification MSD Sheet

Specifications

item #formatTypeBox
70-3550500ml.pot12
70-35400ml.aerosol12

RANGE OF APPLICATION Rust-I-Sol

Brush the original yellow concentrate on the rust on any steel. The active ingredients of ROST-I-SOL, which work without any acids and have a pH value of 7.0, extract the oxygen content from the rust and neutralize it by turning it into a solid bonded and stable ferrous-organic protective layer. This product will convert rust to a black primer, and can be painted after 24 hours , is water base, non toxic will not harm skin.

 

Description

70-3550 Rost-I-Sol Metaflux 70-3550 Rost-I-Sol Metaflux 

• Lead-free, non-caustic patented brush-on rust neutralizer
• Can be safely cleaned after drying
• Works well on moistened rust
• Can be welded over at any time
• Does neither attack nor damage any painted or zinc surfaces
• 500-hour salt spray test according to DIN 50021 certified (University of Paderborn–Prof.Dr.Goldschmidt).
• Forms a black water and airproof layer on rust to insulate and protect from weathering agents causing oxidation
• Color: yellow turning black
• pH value: 7.0
• Storage temperature: 5°C to 40°C [42° to 104°F] protect from frost
• Application temperature: 3°C to 40°C [37° to 104°F]
• optimal range: 15°C – 28°C [59°F – 82.4°F]
• Temperature resistance: 125/175°C [257/347°F]
• 90 μm layer consumption rate: 1 kg = 4-5 m² [2.20 lbs. = 43-54 ft².]

Available in aerosol: